GriggsRacing.com
 
Home » Catalog » SLA Systems and Kits
CATEGORIES
MANUFACTURERS
QUICK FIND
 

Use keywords to find the product you are looking for.
Advanced Search
SLA Kits
 
The Proven Innovator - not an imitator! Short-Long Arm systems and kits:

STREET BENEFITS OVER STRUT SYSTEM:
• Fully track tested, suitable for street
• Simple bolt-on installation
• Substantially increased front grip
• Incredible steering accuracy and feel
• More effective braking
• Much improved front tire wear.

ADDITIONAL BENEFITS for TRACK DRIVERS & MECHANICS:
• Better lap times. Back to back testing on 2.5 mile road course between the best strut systems we offer and SLA resulted in over a 2 second improvement with Toyo 275/40-17 RA1s and 3.1 seconds with 315-30-18 Hoosier R6s.
• Substantially increased front grip and response
• Improved turn in
• Reduced entry and mid-corner understeer
• Aggressive Camber pattern greatly improves front tire life, and temperature balance resulting in no more shoulders worn to belt with half tread remaining in center. Many users tell us this pays for the system after several weekends of running
• Better braking due to less static camber requirement and improved anti-dive geometry and minimal track change during dive.
• Minimal roll center migration stabilizes chassis balance but maintaining consistent weight transfer as body pitches and rolls. This minimizes steering corrections required
• Quick removal of spring and shocks affords ease of bumps steer adjustment
• Easy alignment and chassis set up
• Placement of upper ball joint accommodates wider wheels than other SLA systems
• Utilizes low friction ball joints and Delrin bushed upper control arms for rattle free and quiet operation
• Common shock absorber fitment. System fits any common brand 5" stroke shock with 1/2" inch ball mounts each end that is appropriately valved. Coil-over shock system for adjustable ride height and corner weight. Prices include Koni 30 series. Optional fully developed double adjustable aluminum bodied GRV shocks also available.
• Utilizes existing GR40 K Member, so contact us if you are upgrading from a GR40 Strut system.
• Available for street and race applications
• Utilizes stock SN-95 spindle and hub on street applications
• Can be used on GR40 Aluminum modular spindle and hub system for perfect geometry
• Any Brake caliper and rotor combination can be fitted. Brake brackets available to mount most 3.5 inch pattern calipers on 13, 13.5, 14 and 15 inch” rotors on GR40 MDS series or SN-95 spindle with proper adapter

THE ULTIMATE FRONT END SOLUTION!

All the best GT cars of consequence today, including Corvettes, Ferraris etc., and virtually all race cars with independent front suspension have short upper control arms fitted above longer lower control arms (SLA) instead of MacPherson Struts. All Mustangs* from 1979 to current utilize MacPherson struts front suspension. The reason is not for superior handling, but to afford the automaker a fast and relatively inexpensive way to produce the car. While struts work fine driving in a straight line or with light cornering load, inherent geometric deficiency prohibits full realizations of a tires performance, especially under high lateral load.

A strut is rigid mounted to the spindle and cornering and braking loads are usually pressed against the hydraulic piston and cylinder of the damper, degrading performance and longevity. SLA systems have a shock absorber that can be lighter, less complicated, and being independent of braking and cornering loads suffer no such compromises and therefore deliver superior performance.

More importantly, the roll center is stabilized. In a strut system as the body rises and falls, as during brake dive, or rises under acceleration, the roll center migrates usually double the change in ride height. With a proper SLA system this change is minimal as ride height changes. This contributes to a far more stable chassis balance as the car transitions through the 5 zones of a corner, braking, turn in, mid float, power application, and exit. It is especially beneficial on rough or undulating courses and through esses.

The next big advantage to SLA systems is camber gain, which is the change in applied tire camber as the wheel travels up into the wheel well as the suspension is compressed. With struts the camber curve is minimal, or even regressive, actually losing camber as the wheel travels up in bump motion. So as the body rolls in a corner, compressing the outboard suspension the loaded tire loses applied camber to the road surface, reducing tire contact, and wearing the outside shoulder. To compensate, high static camber settings are needed, 3 4 or 5 degrees, to compensate for tire deflection and camber loss form body roll. But these high negative camber settings are detrimental to performance due to reduced tire foot print under braking, and inconsistent tire contact patch area during transition into and out of a corner. It also results in high shoulder wear. Most front strut cars wear out the tires shoulders, both inside and out while leaving at least a third of the tread in the center of the tire.

GR40 SLA systems have aggressive camber curves designed for current generation performance tires. Static camber on race tracks seldom exceeds 2 degrees. Properly aligned, tires last much longer without the excessive shoulder wear, and performance is more than significantly improved due to the near always flat tire contact patch.

The larger and sticker the tire and the more down force applied, the more brake and cornering load in the front end. Therefore, more reason to use an SLA. The changeover to an SLA system is truly an amazing improvement to the front end of any Strut equipped car no matter how it is driven.

*65-73 Mustangs and 74-78 Mustang IIs were produced with SLA suspension, the latter being a Pinto chassis. However the geometric layout of these cars are not conducive to truly high performance use on today’s high grip tire technology and they are highly compromised in a variety of other ways such as rigidity, camber gain, anti-dive, roll center stability, and large tire fitment without an excessive scrub radius.

SLA vs Strut on Wikipedia:

"SLA or double wishbone suspension provides the engineer more free parameters than some other types do. It is fairly easy to work out the effect of moving each joint, so the kinematics of the suspension can be tuned easily and wheel motion can be optimized. It is also easy to work out the loads that different parts will be subjected to which allows more optimized lightweight parts to be designed. They also provide increasing negative camber gain all the way to full jounce travel, unlike the MacPherson strut, which provides negative camber gain only at the beginning of jounce travel and then reverses into positive camber gain at high jounce amounts.

Strut: Although it is a popular choice, due to its simplicity and low manufacturing cost, the design has a few disadvantages in the quality of ride and the handling of the car. Geometric analysis shows it cannot allow vertical movement of the wheel without some degree of either camber angle change, sideways movement, or both. It is not generally considered to give as good handling as a double wishbone or multi-link suspension, because it allows the engineers less freedom to choose camber change and roll center.

Another drawback is that it tends to transmit noise and vibration from the road directly into the body shell, giving higher noise levels and a "harsh" feeling to the ride compared with double wishbones[citation needed], requiring manufacturers to add extra noise reduction or cancellation and isolation mechanisms."

Click here for SLA Upgrade From Strut Testamonial

    Price   Product Name-   Model   Buy Now 
 Fox SLA w/ Winsor Motor Front Suspension - Street Performance   $4,749.35   Fox SLA w/ Winsor Motor Front Suspension - Street Performance   GR40SLA-SPW  Buy Now 
 Fox SLA w/ Winsor Motor Front Suspension - Road Race Performance   $9,530.81   Fox SLA w/ Winsor Motor Front Suspension - Road Race Performance   GR40 WC-F-SLA  Buy Now 
 Fox SLA w/ Winsor Motor Front Suspension - Autocross/Open Track Performance   $5,230.95   Fox SLA w/ Winsor Motor Front Suspension - Autocross/Open Track Performance   GR40SLA- APW3  Buy Now 
 Fox SLA w/ Modular or Coyote Motor Front Suspension - Street Performance   $4,749.35   Fox SLA w/ Modular or Coyote Motor Front Suspension - Street Performance   GR40 SP-F-SLA  Buy Now 
 Fox SLA w/ Modular or Coyote Motor Front Suspension - Road Race Performance   $9,530.81   Fox SLA w/ Modular or Coyote Motor Front Suspension - Road Race Performance   GR40 WC-F-SLA  Buy Now 
 Aluminum Spindle Kit, SLA Systems, w/Aluminum Hubs & Brake Hats   $3,567.96   Aluminum Spindle Kit, SLA Systems, w/Aluminum Hubs & Brake Hats   MDS 4000  Buy Now 
 ALuminum Drop Spindle Set,  SLA Systems,  OE S197 Hub fitment.   $2,499.95   ALuminum Drop Spindle Set, SLA Systems, OE S197 Hub fitment.   MDS 5000  Buy Now 
 ALuminum Drop Spindle Set,  SLA for Systems,  OE S197 Hub fitment.   $2,499.95   ALuminum Drop Spindle Set, SLA for Systems, OE S197 Hub fitment.   MDS 5000  Buy Now 
 Aluminum Drop Spindle Kit w/Aluminum Hubs & Brake Hats   $3,567.96   Aluminum Drop Spindle Kit w/Aluminum Hubs & Brake Hats   MDS 4000  Buy Now 
 94-04 SLA w/ Winsor Motor Front Suspension - Street Performance   $4,749.35   94-04 SLA w/ Winsor Motor Front Suspension - Street Performance   GR40 SP-F-SLA  Buy Now 
 94-04 SLA w/ Winsor Motor Front Suspension - Street Performance   $4,749.35   94-04 SLA w/ Winsor Motor Front Suspension - Street Performance   GR40 SP-F-SLA  Buy Now 
 94-04 SLA w/ Winsor Motor Front Suspension - Road Race Performance   $9,530.81   94-04 SLA w/ Winsor Motor Front Suspension - Road Race Performance   GR40 WC-F-SLA  Buy Now 
 94-04 SLA w/ Winsor Motor Front Suspension - Autocross/Open Track Performance   $5,230.95   94-04 SLA w/ Winsor Motor Front Suspension - Autocross/Open Track Performance   GR40 AP-F-SLA  Buy Now 
 94-04 SLA w/ Modular or Coyote Motor Front Suspension - Street Performance   $4,749.35   94-04 SLA w/ Modular or Coyote Motor Front Suspension - Street Performance   GR40 SP-F-SLA  Buy Now 
 94-04 SLA w/ Modular or Coyote Motor Front Suspension - Autocross/Open Track Performance   $4,749.35   94-04 SLA w/ Modular or Coyote Motor Front Suspension - Autocross/Open Track Performance   GR40 SP-F-SLA  Buy Now 
 94-04 SLA w/ GM LS, or Ford Modular or Coyote Motor Front Suspension - Road Race Performance   $9,530.10   94-04 SLA w/ GM LS, or Ford Modular or Coyote Motor Front Suspension - Road Race Performance   GR40 WC-F-SLA  Buy Now 
 05-14 GR40TT Autocross/Open Track Front Chassis System   $9,402.26   05-14 GR40TT Autocross/Open Track Front Chassis System   S197 GR40TT Front  Buy Now 
 05-14 GR40RT Road Race/World Challenge Front Chassis System   $10,216.26   05-14 GR40RT Road Race/World Challenge Front Chassis System   S197 GR40RT Front  Buy Now 
 05-10 GR40ST Ultimate Street Front SLA Chassis System for GT500   $6,020.20   05-10 GR40ST Ultimate Street Front SLA Chassis System for GT500   S197 GR40ST GT500 Fr  Buy Now 
 05-10 GR40ST Ultimate Street Front SLA Chassis System   $5,874.20   05-10 GR40ST Ultimate Street Front SLA Chassis System   S197 GR40ST Front  Buy Now 
Displaying 1 to 20 (of 20 products) Result Pages:  1 
Please note: Prices are subject to change.
SHOPPING CART more
0 items
ARTICLES
All Articles
Newsletter Archives ->
Safety
Vehicles For Sale
2005+ Articles
Chassis
General Info
Braking
Race News
Magazine Articles
White Papers
PRODUCT INFO
Install Instructions
Lifetime Warranty
YouTube Videos
GR350 Info Catalog
Watts Links Catalog
White Papers & Blogs
Gallery
Hi-Def On Tack Video
Dealers
About Us
Contingency Programs
Turnkey GR40 Cars
INFORMATION
Shipping & Returns
Privacy & Policies
Newsletter
Contact Us

Copyright © 2017 Griggs Racing Products