CCP 2000 4 Camber Caster Plates.
All procedures should be conducted in accordance with techniques outlined in Ford Service Manuals.
Please recycle all your discarded parts.
WARNING
Working on automobiles can be dangerous. If you are not a skilled mechanic you should find one to perform this installation.
1) Jack up car so the tires are just off the ground.
2) Remove front wheels.
3) Support passenger side control arm with jack.
4) Remove large nut on passenger side strut.
5) Lower the jack supporting the control arm until strut top is out of strut mount.
6) Remove factory upper strut mount and dust boot.
7) Retain only the stock bumpstop.
8) Install base plate into bottom of strut tower.
9) Install camber plate onto base plate studs. (note picture below)
10) Insert strut into upper mount and jack up control arm.
11) Place small spacer and nut onto strut top and tighten.
12) Repeat on drivers side.
13) Align the car
|
