# Tech Article &#8211; TorqueArm Front Mount Article

---
canonical: https://www.griggsracing.com/faq-articles-catalogs/tech-article-torquearm-front-mount-article/
author: Bruce Griggs
modified: 2026-05-05
post_type: page
---

## TECH ARTICLE

---

## **TORQUEARM FRONT MOUNT ARTICLE**

**January 7, 2014                    **

**[TorqueArm](https://www.griggsracing.com/glossary/torquearm/) Front Mount Article**

**There is a propensity**among a large percentage of performance enthusiasts to believe the technical claims of new companies with new products. Often this is just hyperbole. Although technically accurate to a degree in theory, some claims can prove sophomoric in reality. Therefore Such technical hype can in the long run prove to be worth no more than spin to sell product. As an example:

What is the best way to attach the front of a torque arm, with an elastomer, or a rigid slider? Let’s examine both.

**Our Competitor hypes its torque arm for its front mount which is a rigid bearing slider:**

***Hyped Benefits vs. Reality:***

**1)** **Claimed Benefit:**Near zero resistance to [ride height](https://www.griggsracing.com/glossary/ride-height/) change.

**Reality**: This is true. Also true is for over 30 years Griggs has provided certain race teams with TorqueArms with this feature. (Figure 1) The reason for this design is the adjustable [lift](https://www.griggsracing.com/glossary/lift/) or load point can be adjusted fore and aft relative to the [center of gravity](https://www.griggsracing.com/glossary/center-of-gravity/). This can be a useful tool for the knowledgeable chassis tuner when balancing the chassis under power during corner exit in cars with limited front end traction like [strut](https://www.griggsracing.com/glossary/strut/) cars. The key is to have enough adjustment to be useful, and know how and when to use it. And there is a detriment of increased Noise and vibration, (NVH), and traction loss due to no drive line cushioning. GR40 cars with SLA don’t seem to need this adjustment feature, and the noise limitation and traction increase from the cushion is a huge benefit. Griggs Racing’s championship winning development Mustang, “Old Blue” was equipped with a hard slider device for years when it was a strut car. Since its conversion to an SLA, adjustment within the range available had little effect on exit [balance](https://www.griggsracing.com/glossary/balance/). However changing to an elastomer mount increased rear exit traction significantly. *(See Item 4 below).*

**2)** **Claimed Benefit:**Zero resistance to body roll.

**Reality:**This is only true as long as the axis of the TorqueArm mount is concentric with the [roll axis](https://www.griggsracing.com/glossary/roll-axis/) of the car. The roll axis and TorqueArm mount are rarely concentric. The degree of this misalignment at any given time puts a lateral load on the mounting, and a bending moment on the TorqueArm. Quantifying this is difficult for every iteration of roll and ride height. But it is a variable that can result in substantial roll resistance. The real problem is it is non-linear and widely variable with changes in ride height. This can negatively affect consistency of chassis balance.

**Griggs Standard Elastomer Forward TorqueArm Mount:**

***Hyped Detriments by competitor of Griggs Elastomer Mount:***

**3)** **Claimed Detriment:**Bind in vertical chassis motion reducing traction and causing failure.

**Reality**: Both the TorqueArm Elastomer Cushion (bushing) on 2005up S197 applications and the urethane snubber mount on all other years of GR40/GR350 TorqueArm applications are designed especially for adequate longitudinal movement with a minimal resistance. We have found that premature failure of a cushion is usually due to excessive heat exposure; either from exhaust leaks or routing, or dyno tuning with inadequate air circulation under the car, or improper installation, such as tightening the mounting bolts with the axle not held at ride height. Unfortunately elastomers can eventually wear out. But, the great majority of our customers that call to replace these parts have well over 100k miles on them, or years of hard track use. Usually other chassis items need attention by that time as well.

4) **Claimed Detriment:**Inherent [Roll Bind](https://www.griggsracing.com/glossary/roll-bind/).

**Reality:**The compliance of the Elastomer is in all directions is adequate to provide minimal roll resistance within the range of motion achieved in the real world. What small resistance exits is near linear. This load only begins to increase at the limit of the range of motion allowed by the GR40 suspension, which is just over 6 degrees of total roll. Not counting tire compression, total real world suspension roll achieved on track is generally around 3 degrees. This minor roll resistance is NOT noticeable from the driver’s seat.

**What is noticeable is the improved traction compared to a hard bearing TorqueArm mount when applying power exiting a corner.**This traction increase is due to the cushioning effect of the elastomer mount in all standard production GR40 TorqueArms. The cushion will smooth out the 4 power pulses of each cylinder firing per revolution. This reduction of shock from the peak of the firing pulses applies a more constant torque to the tires results in better traction when at the limit of adhesion. High compression or supercharged engines this difference is easy for the sensitive driver to feel and it definitely benefits lap times.

**Also noticeable is how little noise**is transferred from the rear axle into the car where hard bearing TorqueArm mounts are significantly noisier.

**Summary:**Griggs Racing has the ability to produce any type of forward mount and we have conceived numerous designs and materials that we have evaluated. We have proven many times to ourselves that a properly designed elastomer as an interface between the forward Torque Arm load point and the vehicle frame is durable and superior to a hard point sliding mount, due to its inherent quieter operation and drive train [damping](https://www.griggsracing.com/glossary/damping/) characteristic, while not sacrificing chassis balance. The claimed detriments of our system by our new-to-the-market competitor are false. So for the foreseeable future our Standard GR40 TorqueArms will continue to be constructed with elastomer front mounts of one sort or another.

*For more information email engineering@griggsracing.com*

Download a PDF copy [HERE](https://www.griggsracing.com/wp-content/uploads/securepdfs/2018/11/GR__Tech_TorqueArm-Front-Mount-Article-2014-01.pdf)

## CONTINUE READING

---

- [TECH ARTICLES](#)

- [Are Coil-Overs Just for Track Junkies](https://www.griggsracing.com/faq-articles-catalogs/tech-article-are-coilovers-just-for-track-junkies/)
- [Brake Tech](https://www.griggsracing.com/faq-articles-catalogs/tech-article-brake-tech/)
- [Griggs Racing Wing](https://www.griggsracing.com/faq-articles-catalogs/tech-article-griggs-racing-wing/)
- [IRS vs Stick Axle Debate](https://www.griggsracing.com/faq-articles-catalogs/tech-article-irs-vs-stick-axle-debate/)
- [TorqueArm Front Mount Article](https://www.griggsracing.com/faq-articles-catalogs/tech-article-torquearm-front-mount-article/)
- [Why Weld Your TorqueArm vs Not Welding](https://www.griggsracing.com/faq-articles-catalogs/tech-article-why-weld-your-torquearm/)
- [Watts Link vs Panhard Bar](https://www.griggsracing.com/faq-articles-catalogs/tech-article-watts-link-vs-panhard-bar/)
- [Myth Debunking: Panhard Bar Superiority vs Proper Watts Link](https://www.griggsracing.com/faq-articles-catalogs/tech-article-myth-debunking-panhard-bar-superiority-vs-proper-watts-link/)
- [Watts Link Axle vs Chassis Mount](https://www.griggsracing.com/faq-articles-catalogs/tech-article-watts-link-axle-vs-chassis-mount/)
- [Shedding Light on Ford Watts Link Approval](https://www.griggsracing.com/faq-articles-catalogs/tech-article-griggs-watts-link-and-ford-approval/)
- [Watts Link Single Shear Question](https://www.griggsracing.com/faq-articles-catalogs/tech-article-watts-link-single-shear-design/)
- [Steering Rack Differences](https://www.griggsracing.com/faq-articles-catalogs/tech-article-steering-rack-differences/)
- [Bushings vs Rod Ends](https://www.griggsracing.com/faq-articles-catalogs/tech-article-bushings-vs-rod-ends/)

- [CATALOGS](#)

- [Griggs Racing – GR350 Chassis Systems](https://www.griggsracing.com/faq-articles-catalogs/pdf-catalog-gr350-chassis-systems/)
- [Griggs Racing – GRV Shocks – Catalog & Installation](https://www.griggsracing.com/installation-instructions/pdf-grv-shocks-catalog-installation/)
- [Griggs Racing – MDS Aluminum Spindle](https://www.griggsracing.com/faq-articles-catalogs/pdf-catalog-mds-aluminum-spindle/)
- [Griggs Racing – Watts Link (Jan 2014)](https://www.griggsracing.com/faq-articles-catalogs/pdf-catalog-watts-link-jan-2014/)
- [Jongbloed Racing Wheels – JRW700](https://www.griggsracing.com/faq-articles-catalogs/pdf-catalog-jrw700-wheels/)
- [Shocks, Struts, Wheels (Sept. 2013)](https://www.griggsracing.com/faq-articles-catalogs/pdf-catalog-shocks-struts-wheels-sept-2013/)

- [CUSTOMER TESTIMONIALS](#)

- [SLA Front Suspension – Chuck Thomson](https://www.griggsracing.com/faq-articles-catalogs/pdf-testimonials-sla-front-suspension-chuck-thomson/)

- [LETTERS FROM BRUCE](#)

- [Can’t Stand to Be Passed](https://www.griggsracing.com/faq-articles-catalogs/letters-from-bruce-cant-stand-to-be-passed/)
- [Do You Want To Be a Professional Racecar Driver?](https://www.griggsracing.com/faq-articles-catalogs/letters-from-bruce-becoming-a-professional-racecar-driver/)
- [Response to Recent Competitor Remarks (2015-12)](https://www.griggsracing.com/faq-articles-catalogs/letters-from-bruce-response-to-recent-competitor-remarks-2015/)

- [MEDIA MENTIONS](#)

- [1985 Mercury Capri – Near Miss – Muscle Mustangs & Fast Fords](https://www.griggsracing.com/faq-articles-catalogs/pdf-media-mentions-mercury-capri-near-miss/)
- [Steve McQueens Bullitt Mustang Meets 2017 – Mustang Monthly](https://www.griggsracing.com/faq-articles-catalogs/pdf-media-mentions-steve-mcqueens-bullitt-mustang-meets-2017/)
- [1967 Mustang Fastback “Dark Horse” – Mustang Monthly](https://www.griggsracing.com/faq-articles-catalogs/pdf-media-mentions-1967-fastback-dark-horse/)
- [1970 Mustang Mach1 Adrenaline High – Modified Mustangs & Fords](https://www.griggsracing.com/faq-articles-catalogs/pdf-media-mentions-1970-mach1-adrenaline-high/)
- [1968 Mustang – Every Which Way But Loose – Modified Mustangs & Fords](https://www.griggsracing.com/faq-articles-catalogs/pdf-media-mentions-1968-mustang-every-which-way-but-loose/)
- [Better Than Good (S197) – Mustang & Fords](https://www.griggsracing.com/faq-articles-catalogs/pdf-media-mentions-better-than-good/)
- [1998 Mustang Cobra – Rocos Rocket – 5.0 Mustang & Super Fords](https://www.griggsracing.com/faq-articles-catalogs/pdf-media-mentions-1998-mustang-cobra-rocos-rocket/)
- [1998 Mustang Cobra – Vitamin AI – Muscle Mustangs & Fast Fords](https://www.griggsracing.com/faq-articles-catalogs/pdf-media-mentions-1998-mustang-cobra-vitamin-ai/)
- [Extreme Winner – 5.0 Mustang & Super Fords](https://www.griggsracing.com/faq-articles-catalogs/pdf-media-mentions-griggs-racing-extreme-winner/)
- [Been There, Done It All – 5.0 Mustang & Super Fords](https://www.griggsracing.com/faq-articles-catalogs/pdf-media-mentions-been-there-done-it-all/)
- [Motor Trend Test of a Basic GR40 System Installed on a 2003 Mach1](https://www.griggsracing.com/faq-articles-catalogs/pdf-media-mentions-motor-trend-test-of-a-basic-gr40-system-installed-on-a-2003-mach1/)
- [Iron Lung – 5.0 Mustang & Super Fords](https://www.griggsracing.com/faq-articles-catalogs/pdf-media-mentions-iron-lung/)
- [1996 Mustang Cobra Mystical Mission – 5.0 Mustang & Super Fords](https://www.griggsracing.com/faq-articles-catalogs/pdf-media-mentions-1996-cobra-mystical-mission/)
- [TransAm Reborn! – HotRod Magazine](https://www.griggsracing.com/faq-articles-catalogs/pdf-media-mentions-hotrod-transam-reborn/)
- [1986 Mustang – The Ripper – 5.0 Mustang & Super Fords](https://www.griggsracing.com/faq-articles-catalogs/pdf-media-mentions-1986-mustang-the-ripper/)

- [VEHICLE PLANNING](#)

- [Can I Build In Stages?](https://www.griggsracing.com/vehicle-education/vehicle-planning-can-i-build-in-stages/)
- [Build Questionnaire](https://www.griggsracing.com/faq-articles-catalogs/vehicle-planning-build-questionnaire/)
- [What Are Your End Goals?](https://www.griggsracing.com/vehicle-education/vehicle-planning/)
