K-Member & Mounts
1 K-Member & Mounts
Please select your motor type and preferred motor mount, which will prescribe the appropriate K-Member and parts. In the following steps your additional components (Springs, Anti-Roll Bar, Control Arms, etc...) will be selected based upon your Vehicle Usage Priority and other choices.
Vehicle Usage Priority
2 Vehicle Usage Priority
What vehicle usage will you demand the most performance from your car? This may not be where you use the vehicle the most.
EXAMPLE: AutoX/Open Track can be the priority, while the car spends most of its time Daily Driven.
Anti-Roll Bar Configuration
3 Anti-Roll Bar Configuration
Do you prefer to use our Griggs Racing Bind-Free Anti-Roll Bar, or the OE Anti-Roll Bar?
Hub Selection
4 Hub Selection
Select your desired hub configuration. Race prepared hubs are packed with high temperature grease rated up to 900°F and include upgraded studs.
Steering Kit
5 Steering Kit
A Bumpsteer Kit is mandatory, and selection is based upon the type of steering rack and/or spindles you will use. If you would like to purchase one of our racks - now is the time.
Our steering racks are prepared with -6AN fittings installed, and lines secured to minimize risk of vibration induced breakage, and set for improved feedback and performance while providing extended longevity when used with our steering cooler.
Linear Rack @ 15:1 (Quicker response on center, recommended for competition driving.)
Variable Rack @ 15:1 (Slower response on center, recommended for relaxed street driving.)
Select Camber Plate
6 Select Camber Plate
You need caster-camber plates to correctly align your vehicle after chassis modifications are made.
Select your Caster-Camber Plate, or opt-out if you feel your have another apprpriate alternative for your application and usage.
Select Strut Kit
7 Select Strut Kit
Select the Coil-Over Strut Kit you would like to use.
